EZ-Deflator Operating Instructions

1. With valve core remover pulled back, screw the unit onto the valve stem.
2. Push the slide collar forward (toward the valve stem) to prevent air loss as the valve core is removed.
3. Push the valve core remover forward and turn counter clockwise to unscrew the valve core. Pull valve core remover back to retract valve core for deflation.
4. Gauge now shows tire pressure and unit is ready to deflate the tire.
5. Pull slide collar backward to quickly bleed air from the tire. NOTE: Tire gauge does NOT show actual tire pressure while deflating.
6. Push slide collar forward to stop air flow and check tire pressure. Repeat steps 5&6 until pressure is at desired inflation level.
7. Push valve core remover forward and turn clockwise to screw in valve core. NOTE: Do not over tighten valve core.
8. Unscrew the unit from the valve stem.