1 If vehicle
was manufactured during 1993, check spline count.
2 Air Locker
not available for vehicles equipped with high load option.
3 RD03A ring
gear spacer required. Longer ring gear bolts (not supplied) are also
necessary - (Land Rover part no. 576521.)
4 When an RD03
Locker is to be installed in Range Rovers manufactured prior to
1980 (approx.), special carrier bearings
(No.
K11300/K11162) may also be necessary - Land Rover part no. RTC3426.
5 Some
vehicles have crown wheel bolts which cannot be reused and must be
replaced. Consult service manual.
6 Some
vehicles without traction control also use RD57. Identify by 205mm
[8.07"] flange diameter.
7 1995
Discovery could require RD56 or RD57