NISSAN

ARB AIR Lockers for Xterra - Titan - Pathfinder

Step1: Use the Chart below to find your application.

1 Only suitable for differentials with 12mm crown wheel bolts.
2 No application for leaf sprung cab chassis vehicles with 34 spline axle shafts.
3 Refer to dealer or check spline count to determine axle type.
RD135 & RD136 require the higher rated 50mm ID carrier bearing (Timken #32010X - ARB #160116).
4 Floating thrust block(s) are included but should ONLY be installed on semi-floating axle assemblies. Refer to installation guide.
5 Available late 2008.
6 RD137 does not suit ratio up to 3.36:1 due to RG offset.

Step2: Enter the corresponding Part Number (Example:"RD110") below.